Monstargear Alu XO v3
Sold out
$435.00

Monstargear Alu XO v3


Extra Drop

Two housing maximum for one order.

If you order more than two housing(three or more) in one order your order will be cancelled.


If you can not choose your country, choose any country first and contact us.

If there is issue with Paypal please try with other device and contact us.

Contacting with discord is fastest way to get an answer.


How to assemble


Product Spec

Weight: 2.8kg

Typing angle : 9˚

Size:  367.6mm x 146.5mm  

Front18.7mm(whitout Bumpon)

Housing  :Aluminum

(Navy: Anodizing, White: E-coat)

Weight: PVD Coat Brass(700g)

Plate: PVD Coat Brass

Mounting style : Top mount


PCB

Solderable

QMK supported, PCB mount stabilizers, underglow LED,  5pin hole, USB type- C

NKRO


Hot-swap

RGB Back lit LED, Kailh hot swap socket(no solder required)

VIA supported, PCB mount stabilizers, underglow LED,  5pin hole, USB type- C

NKRO



You can choose your weight between stainless steel and brass

If you choose to use brass weight please check bottom of this page


Can control LED with our own program

To map a key you need to use QMK toolbox

 make Hex file through here: https://kbfirmware.com/


 No need to choose an weight & PCB option if you want brass weight and solderable PCB


You need to upload new firmware before use.

Please read "how to map" before upload the firmware

Hot swap board use VIA config check "XO QMK VIA file"


Due to it is limited item, except the major functional issue we do not take any refund and returns for this product.