XO K80 alu
Mount - Sandwich mount
Angle - 7˚
Weight - Brass weight with hairline, glossy antique PVD coat.
Plate - Aluminium(Can use new XO v2 brass plate)
housing - Aluminum
Manufactured in Korea
QMK supported, PCB mount stabilizers, underglow LED, 5pin hole, USB type- C
RGB Back lit LED, Kailh hot swap socket(no solder required)
VIA supported, PCB mount stabilizers, underglow LED, 5pin hole, USB type- C
Once gasket kit is sold out, it will be re-stocked later in March
No switches, keycaps, stabilizers are included to the kit.
The image it an example
You need to buy switches, keycaps, stabilizers in order to use as a keyboard.
Shipping date - Feb 2021(Around 17th Feb)
-> 24th of Feb 2021
Can control LED with our own program
To map a key you need to use QMK toolbox
make Hex file through here: https://kbfirmware.com/
You need to upload new firmware before use.
Please read "how to map" before upload the firmware
Hot swap board use VIA config check "XO QMK VIA file"
We can not compensation by consumer negligence
Due to it is limited item, except the major functional issue we do not take any refund and returns for this product.
If you can not choose your country, choose any country first and contact us.
If there is issue with Paypal please try with other device and contact us.
Contacting with discord is fastest way to get an answer.