Monstargear Alu XO v3
Two housing maximum for one order.
If you order more than two housing(three or more) in one order your order will be cancelled.
If you can not choose your country, choose any country first and contact us.
If there is issue with Paypal please try with other device and contact us.
Contacting with discord is fastest way to get an answer.
Typing angle : 9˚
Size: 367.6mm x 146.5mm
(Navy: Anodizing, White: E-coat)
Weight: PVD Coat Brass(700g)
Plate: PVD Coat Brass
Mounting style : Top mount
QMK supported, PCB mount stabilizers, underglow LED, 5pin hole, USB type- C
RGB Back lit LED, Kailh hot swap socket(no solder required)
VIA supported, PCB mount stabilizers, underglow LED, 5pin hole, USB type- C
You can choose your weight between stainless steel and brass
If you choose to use brass weight please check bottom of this page
Can control LED with our own program
To map a key you need to use QMK toolbox
make Hex file through here: https://kbfirmware.com/
No need to choose an weight & PCB option if you want brass weight and solderable PCB
You need to upload new firmware before use.
Please read "how to map" before upload the firmware
Hot swap board use VIA config check "XO QMK VIA file"
Due to it is limited item, except the major functional issue we do not take any refund and returns for this product.